In order to meet the market demand for upgrading technic for aluminum profiles surface treatment, our company has developed two models of polishing machine, JYFP7000 and JYFP6500. The equipment is used in grinding, forging, polishing of aluminum products or stainless steel profiles and mirror effect on the surface. It is an essential machine for the pretreatment of aluminum profiles, which prior to electrochemical treatment.
Service line
400-1088-778 / 0757-85588578
In order to meet the market demand for upgrading technic for aluminum profiles surface treatment, our company has developed two models of polishing machine, JYFP7000 and JYFP6500. The equipment is used in grinding, forging, polishing of aluminum products or stainless steel profiles and mirror effect on the surface. It is an essential machine for the pretreatment of aluminum profiles, which prior to electrochemical treatment.
JYFP6500
Electric System adopts Taida Transducer, Schneider low voltage electric element. The polishing wheel uses digital display to control the up-down. The moving speed of polishing and working table can enforce stepless speed regulating. So that obtain ideal polishing effect.
Working Principle:
The equipment is consist of two groups of high speed fabric discs or nylon wheels. Grinding on the surface of the profiles so that obtain satin or mirror effect on the surface. During polishing, the polishing compound should be coated on the fabric discs or nylon wheels (Generally, polishing wax is preferred).
Main Technical Parameters:
Model
JYFP6500
Dimension of Work-Table (L*W)
6500 × 700 mm
Polishing Wheel
16″ (Φ400mm)
Dimension of Profile Polished (Maximum)
6000×650 mm
Height of Profile Polished (Maximum)
250 mm
Lifting Speed of Polishing Wheel
6 mm/s
Air Pressure
0.6 MPa
Speed of Work-Table
5 ～ 22 m/min （speed control by frequency variation）
Main Shaft Speed
1470 rpm （speed control by frequency variation）
Dust Cleaner
Blower Fan C6-46-3A-3kW
Spare Parts
one set of buffing wheel, one set of accessory
Total Power 42.6 kW
Main Motor：18. 5kW×2
Moving Motor ：0.75 kW×2
Vertical Motor: 1.1 kW
Dust Cleaning Blower：3 kW
Voltage
380 V
Dimension (L*W*H)
2070 × 2200 × 1500 mm
Weight
12000 kg Approx.
JYFP7000
Main Motor adopts ABB, transducer adopts Taida, PLC and control element use Mitsubishi, EV touch panel, spraying system with lapping liquid is from HDP- II Widoberg(German). All these configurations contribute to make the machine more reliable and workable.
Working Principle:
The equipment is consist of two groups of high speed fabric discs or nylon wheels. There is polishing compound (liquid or solid) between metal surface and polishing wheels. So could produce satin or mirror effect on the surface. Its special design of horizontal movement can greatly improve the quality of polishing.
Main Technical Parameters
Model
JYFP7000
Dimension of Work-Table (L*W)
7000 × 1000 mm
Number of Work-Table
2 (one work-table can be chose)
Polishing Wheel
16″～ 20″
(Φ400mm ～ Φ500mm)
Main Shaft Speed
1000 rpm（speed control by frequency variation)
Horizontal Movement of Polishing Wheel
20 mm
Vertical Movement of Polishing Wheel
250 mm
Lifting Speed ofPolishing Wheel
2 mm/s
Speed of Working Cart
5 ～ 9 m/min（speed control by frequency variation)
Capacity of Lapping Liquid
0.2 ～ 0.3 cm3/pc total 4 pcs (adjustable)
Dust Cleaner
Blower Fan C6-48-4A-5.5kW
Spare Parts
one set of buffing wheel, one set of ccessory
Total Power 53.2 kW
Main Motor：22 kW×2
Moving Motor：1.5 kW
Vertical Motor：0.55 kW×2
Horizontal Motor：0.55 kW×2
Dust Cleaning Blower：5.5 kW
Voltage
380 V
Dimension (L*W*H)
3500 × 2400 × 2000 mm
Weight
15000 kg Approx.
NOTES: Customized design according to customers’ demand. These parameters are for conventional configuration. The actual parameters of the equipment are subject to the ex- factory products. Please provide clear indication in the contract for any special requirements.
